Project Component

figure.1 Components

figure.2 Magnets and rails

As can be seen in the picture,the magnets are setting in parallel while the two rails are settled in between. Once the edge of the rails are powered by the current, the current through the bullet would trigger the object to move as a result of Lorentz force. Theoretically, the bullet could attain a velocity of 1 m/s. 

figure.3 Sensor circuits

 The sensor part include two individual circuits, the circuit at the top of the picture is a basic LED circuit and the circuit at the bottom is an amplifier circuit.

figure.4 Charge up circuit

figure.5 magnets